WIK 3 ton full AC electric counterbalanced forklift
Standard configuration: Italian sarcontroller
Zibo Torch Battery
Full AC motor
Two three-meter door frames
Positive new tires
Toolbox / service pack
Performance Description: Standard Italian sarcon controller, to ensure smooth and accurate walking and lift control
The speed control performance is good, and the electric control matching performance of the motor is good
Zibo torch battery, long working time, stable performance, green environmental protection
AC drive system, motor maintenance-free, reduce the replacement of carbon brush and other maintenance costs
LCD dashboard, good visibility, reading only, human-computer interface friendly
According to the ergonomically designed inclination adjustable steering wheel, the driver feels good
Wide field of view door frame, good operating field of view, high safety
Positive new tires, high wear strength, shock-absorbing effect is good
Optional configuration: Sa card controller, full AC motor
INCO controller, DC motor
Two sections 3.0 m,3.3/3.5/4.0/4.5/5.0 m door frame
Two sections 3.0 m,3.3/3.5/4.0/4.5/5.0 m full free door frame
Three sections 4.5 m,4.8/5.0/5.5/6.0/6.5 m full free door frame
Positive new gas tire / solid tire, sunrise gas tire / solid tire, environmental protection solid tire
According to different goods, assembly of different belongings, such as side shift, cotton bag clip
Paper roll clips, carton clips, etc
WIK Main technical parameters
|Rated load kg||3000kg||Full length no fork mm||2860。|
|Load center mm||500。||Full width mm||1225。|
|Power type||Battery.||The top frame height mm||2160。|
|How to drive||Ride||Fork size mm||1070x125x45|
|Wheelbase mm||1720。||Minimum turning radius mm||2190。|
|Tire type||Inflatable tire||The door frame is out of ground clearance mm||125。|
|Before / after the number / wheels||2/2。||Frame center ground clearance mm||130。|
|Front wheelbase mm||1000。||Right angle stacking channel width||4075。|
|Rear wheelbase mm||980。||The maximum travel speed is full km/h||13.5。|
|In front of the tire||28×9-15||The maximum lift speed is fully loaded mm/m||300。|
|Behind the tire||18×7-8||Maximum climbing ability%||15。|
|Front overhang mm||490。||Self-weight no load Kg||4930。|
|The door frame is tilted forward /||6/12。||Battery voltage / V/Ah||80/500。|
|Door frame floor height mm||2060。||Battery case size mm||710×780×1028|
|Maximum lift height mm||3000。||Traction motor power kw||12。|
|Maximum height mm when working||4250。||Pump motor power||12。|
Forklift operations can reduce labor input and labor intensity, improve work efficiency, and fully utilize the space positions of cabins, carriages, and warehouses. It also shortens the operation time of loading, unloading, handling, and stacking, speeds up the turnover of vehicles and ships, and improves The degree of safety of the job.
Internal combustion forklifts generally use diesel, gasoline or liquefied petroleum gas engines to provide power. They are heavy and independent. They are mainly used in workplaces with large slopes, uneven roads, heavy objects, and severe weather conditions.
Let me introduce the radiator system of the internal combustion forklift.
The radiator system includes radiator and windshield, etc. The radiator is also called a water tank, which is composed of three parts: the water inlet chamber, the water outlet chamber and the heat dissipation core. The cooling liquid (water) flows in the radiator core, and the air passes outside the radiator core, so that the heat absorbed by the cooling water from the internal combustion engine can be transferred to the outside air, so that the cooling water temperature can be lowered to circulate again. The function of the windshield is to make the air sucked in by the fan pass through the radiator to improve the efficiency of the fan.
Internal combustion forklifts generally use diesel, gasoline, liquefied petroleum gas or natural gas engines as power, with a load capacity of 1.2 to 8.0 tons, and a working channel width of 3.5 to 5.0 meters. Considering exhaust emissions and noise, they are usually used outdoors, workshops or other Places with no special requirements for exhaust emissions and noise. Due to the convenience of fuel replenishment, it can realize long-term continuous operation and can work in harsh environments (such as rainy days).
If the water pump is not working properly or the center distance between the driving wheel and the driven wheel of the fan pulley is not correct, the belt will be loose and slippery, so that the speed of the driven wheel will drop, the speed of the water pump will drop, and the flow rate of the water pump will drop; The road is blocked and the water flow is not smooth; or the thermostat malfunctions and the water circulation of the entire system is stopped; the above factors will cause the internal water temperature of the internal combustion engine to rise sharply, causing the cooling system to overheat. In addition, the internal combustion engine will overheat the cooling system due to other malfunctions such as incorrect ignition time.
1. Forklift Trucks are small in size, but have good stability and are suitable for towing. They are used for unlimited time. They are generally used outdoors. Compared with gasoline engines, diesel engines have better dynamics (easy to overheat at low speeds, short-circuit capabilities, and long-term operation capabilities), and low fuel costs. However, they have large vibration, large noise, large displacement, self-fundamental, and high price. The load can be from 0.5 tons to 45 tons.
2. Forklift Trucks are small in size, but have good stability and are suitable for towing. They are used for unlimited time and are generally used outdoors. Gasoline engines have small appearance, light adjustment, high output power, low working noise and vibration, and low price. However, gasoline engines have better short-circuit capability, long-term operation capabilities, and relatively low fuel costs. The load can be 0.5 tons to 4.5 tons.
3. Balanced heavy-duty liquefied petroleum gas forklift (full name LPG) is a balanced heavy-duty gasoline forklift equipped with a liquefied petroleum gas switching device, which is reduced to an LPG forklift, which can be used to switch between gasoline and liquefied gas through the switch. The second advantage of LPG forklifts is that the exhaust gas is good, and the waste gas of hydrolyzed carbon (CO) is significantly more than that of gasoline engines. The fuel cost is low (15KG of liquefied gas is equal to 20 liters of gasoline), and it is limited to indoor operations with low environmental rejection.